Ontario can you change lanes in an intersection

On narrow roads you need to make a three-point turn to change directions. As shown in Diagram , a three-point turn starts from the far right side of the road. Make sure you do not make a three-point turn on a curve in the road, on or near a railway crossing or hilltop, or near a bridge or tunnel that blocks your view. Signal for a left turn.

When the way is clear in both directions, move forward, turning the steering wheel sharply left towards the curb on the far side of the road. When you have reached the left side of the road, stop. Shift the vehicle into reverse.

Signal a right turn. After checking that the way is still clear, turn the steering wheel sharply to the right, while backing up slowly to the other side of the road. Shift to forward gear and check traffic. When the way is clear, drive forward. The Ministry of Transportation strives to be a world leader in moving people and goods safely, efficiently and sustainably to support a globally competitive economy and a high quality of life.

Skip to main content. Changing directions. Turning a corner To turn a corner, signal well before the turn. Right turns Diagram Unless signs or pavement markings tell you not to, always begin and end a right turn close to the right side of the road. Right turn on a red light Unless a sign tells you not to, you may make a right turn facing a red light as long as you first come to a complete stop and wait until the way is clear.

Left turns Unless signs or pavement markings tell you not to, always begin and end a left turn in the far left lane in your direction. The following diagrams show you the correct way to turn left on different types of roads: Diagram Two-way road to a two-way road.

Diagram Two-way road to a one-way road. Turn from the lane closest to the centre line to the left curb lane. Diagram One-way road to a two-way road. Diagram One-way road to a one-way road. Turn from the left curb lane to the left curb lane. Left-turn lanes Diagram Some roads have special lanes for vehicles turning left Diagram Diagram The centre lane of some roads is used as a two-way left-turn lane Diagram To use a two-way, left-turn lane, follow these steps: Signal and move into the centre lane shortly before your turn.

Slow down. Carefully move forward to a spot opposite the road or driveway where you want to turn. Left turn on a red light You may turn left from a one-way road to a one-way road on a red light after coming to a complete stop and making sure the way is clear.

Driving through roundabouts Diagram Approaching: Diagram As you approach the roundabout, look for signage to choose your exit. Choose which lane to use as you would for any other intersection See Diagram Use the left lane to turn left or to go straight. Use the right lane to turn right or to go straight. Do not enter a roundabout from the right lane if you want to turn left. Cyclists generally keep to the centre of the appropriate lane, or dismount and use the roundabout as a pedestrian would.

Slow down and watch for pedestrians on the approach to the yield line at the entrance of the roundabout. Editorial code of conduct. Skip to main content. Jason Tchir. Special to The Globe and Mail. Bookmark Please log in to bookmark this story. Log In Create Free Account. Remember that spending a few seconds behind another vehicle is often safer than going around it.

Passing is changing lanes to move past a slower vehicle. While all public roads have speed limits, not all vehicles travel at the same speed. For example, cyclists, road service vehicles and drivers ahead that are preparing to turn are usually slower than the through traffic. You may want to pass some slow-moving vehicles when you are following them.

Never overtake and pass another vehicle unless you are sure you can do so without danger to yourself or others. Don't pass moving snow plows under any conditions.

If in doubt, do not pass. Passing within 30 metres of a pedestrian crossover is not permitted. Passing left of a centreline is not permitted 30 metres from a bridge, viaduct or tunnel.

Don't attempt to pass when approaching the crest of a hill or on a curve where your vision of oncoming traffic is obstructed and there is not enough clear distance ahead to pass in safety.

When passing parked vehicles, watch carefully for people suddenly opening doors or for doors opened to load and unload. Motorcycles, bicycles, limited-speed motorcycles and mopeds often need to pull to the left or right side of their lane to avoid dangerous road conditions or to be seen by other drivers.

Do not take this as an invitation to pass in the same lane. If you do want to pass these vehicles, do so by changing lanes. When faster traffic wants to pass you, move to the right and let it pass in safety. When being passed on an undivided road where the passing driver has pulled into the opposite lane, pay attention to oncoming traffic and move closer to the right side of the lane.

Be prepared to slow down to let the passing driver get in front of you more quickly to prevent a collision. On many high-speed roads with three or more lanes in each direction, trucks are not allowed to drive in the far left-hand lane. This means that the lane next to it is the truck passing lane.

If you are in this lane and a truck wants to pass, move into the right-hand lane as soon as you can. On multi-lane streets and on highways, the left-hand lane is generally designated for turning or for changing lanes. Although drivers can also change lanes to the right on multi-lane or one-way streets, this move is inadvisable on highways as the generally understood etiquette is for slower drivers to use the right lane while the left is used for passing.

When passing streetcars, however, drivers should normally use the right-hand lane, except on one-way streets. Once the vehicle passes the obstruction or slower road user, the driver may wish to return to the previous lane. Doing this too soon can result in an accident, and drivers should be sure to wait until they can see the entire front of the other vehicle in the rearview mirror before they attempt to move back into place. When approaching another vehicle from behind to pass it, drivers should remember to switch from high beams to low beams to avoid this problem.

The first consideration in proper lane changes is the safety of everyone involved, but insurance and other financial consequences of reckless driving are also important. Although the degree of fault can vary, depending on the exact circumstances, it is important to remember that the driver who is already in the lane is considered to have the right-of-way. Anyone else moving into that lane needs to be sure that it is safe before moving into place. Still, driving is a cooperative task. If drivers insist on their rights without consideration for others, the roads can become dangerous places where the most vulnerable road users suffer.